Vidikron Vision 30 User Manual download pdf (Page 23)

Vidikron Vision Model 30 Owner’s Operating Manual

Installation



Vertical and Horizontal

Position

Proper placement of the projector relative to the screen will yield a rectangular, perfectly-

centered image that completely fills the screen.

Ideally, the projector should be positioned perpendicular to the screen and in such a way

that the lens center is aligned with either the top or bottom edge of the screen area, and

centered horizontally.

The top of the projected image is even with the lens center when the projector is inverted

(ceiling-mounted). Likewise, the bottom of the projected image is aligned with the lens

center when the projector is upright (as in a floor installation).

Screen

Height

Projection Distance

Ceilin

Lens Center

Ceiling Installation

Screen

Height

Floo

Lens Center

Projection Distance

Floor Installation

Lens Center

If it is not possible to align the projector and screen as shown above, you can tilt the projector

at a slight angle. In a ceiling installation, you do this by adjusting the ceiling mount. For

a floor installation, turn the four adjustable feet on the bottom of the projector to adjust

the projector height and/or projection angle.

If you do this, you may need to make keystone adjustments or vertically shift the image

using the on-screen display (OSD) controls, to compensate. For detailed instructions, refer

to On-Screen Display Menus, later in this manual.



Adjusting the Projection Angle

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 57 58

No comments

Vidikron Vision 30 User Manual Page 23