Vidikron Vision 30 User Manual download pdf (Page 36)

Vidikron Vision Model 30 Owner’s Operating Manual

Image Options

Vision Model 30

Picture Adjust

Image Option

Projector Status

Installation

Service

ISF Calibration

Active Image Area

Active

Image Area

Active Image Area

Image Option

Input Select

Aspect Ratio

SD Enhance

Video Filter

HD/RGB Adjust

Blue Enable

Save Settings

Load Saved Settings

To access additional image settings, press MENU, then press the ▲ or ▼ arrows to highlight

Image Option and press ENTER. The Image Option sub-menu then appears (see above).

To select a source signal, highlight Input Select, press ENTER and select Video, S-Video,

Component 1, Component 2, RGB-HD or HDMI. Then, press ENTER to confirm.

To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio

from the Image Option menu and press ENTER. There are six aspect ratios available that

can be selected for video signal inputs:

On-Screen Display Menus

Input Select

Aspect Ratio

• Anamorphic

The image is compressed vertically,

but anamorphic software will appear

properly proportioned. This is best

suited for use with 16:9 DVDs and HDTV

programming.

• Standard (4/3)

The input signal is scaled to fit in the

center of the 16:9 screen.

• Letterbox

The image in the Letterbox mode is

stretched vertically, and the top and bottom

portion ‘blanked off’. This ratio is best suited

for LaserDisc movies or non-anamorphic

DVDs.

• IntelliWide

A 4:3 image is transformed into a 16x9

image.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 57 58

Comments to this Manuals

No comments

Vidikron Vision 30 User Manual Page 36

Comments to this Manuals

Related products and manuals for Projectors Vidikron Vision 30